📘 Checklist: what to fix now, what can wait →
Your IP address
216.73.216.42
- Abuse reports (2/54 sources)−25
- Network abuse rate (very high)−25
- Datacenter / hosting IP (amazonaws.com)−20
📋 Test history on this device 0
Saved only in this browser on this device. Nothing is uploaded.
preliminary check
Many platforms treat datacenter IPs as higher risk. Teams that run stores or social accounts usually need a stable residential-grade static IP.
Frequently asked questions
What is an IP address? What is the difference between IPv4 and IPv6?
An IP address is the address a device uses to communicate on the internet. IPv4 addresses are 32 bits long, about 4.3 billion in total, written as four numbers such as 203.0.113.9 (RFC 791); IANA handed out the last of the global IPv4 pool in February 2011. IPv6 addresses are 128 bits long, written in hexadecimal such as 2001:db8::1 (RFC 8200), and are practically unlimited. In March 2026 Google measured more than half of its users reaching it over IPv6 for the first time. Many networks have both an IPv4 and an IPv6 exit, so both should be checked.
What is an ASN (Autonomous System Number)?
An ASN is the ‘house number’ of a network operator. RFC 1930 defines an autonomous system as a group of IP prefixes run by one or more operators under a single, clearly defined routing policy. ASNs are assigned by the five Regional Internet Registries (AFRINIC, APNIC, ARIN, LACNIC and RIPE NCC). The ASN and the operator name tell you whether an IP belongs to a telecom carrier, a cloud provider or a company network.
What is the difference between a datacenter IP and a residential IP, and why do platforms care?
Residential IPs are assigned by internet providers to home broadband users, mobile IPs come from mobile carriers, and datacenter IPs belong to cloud servers and hosting facilities. Real consumers rarely browse from servers, so e-commerce, social and ad platforms usually treat datacenter IPs as higher risk and may trigger verification, rate limits or reviews. Teams that run stores or social accounts are generally better served by a stable residential-grade static IP.
What is a native IP? What is a broadcast IP?
Every IP block has a registered country (where it is recorded with a regional registry) and a location country (where it is actually used). MaxMind, a leading geolocation data provider, keeps these as separate fields and notes they can differ. ‘Native IP’ is an industry term for an IP whose registered and location countries match and that is provided by a local operator; ‘broadcast IP’ refers to a block registered in one country but announced and used in another. Some platforms compare the two, and broadcast IPs are more easily flagged as cross-border proxies. Note: we approximate this with the registration country of the IP’s autonomous system, which can misjudge multinational operators, so it only carries a small deduction.
What is the difference between a proxy, a VPN and Tor, and how are they detected?
A proxy usually forwards traffic for a single application; a VPN forwards all of a device’s traffic through an encrypted tunnel; Tor routes traffic through three volunteer relays, and the Tor Project publishes its list of exit nodes. Detection relies mainly on known lists, continuous collection of VPN provider servers and scans for open proxy ports. These tools are legal, but their exit IPs are shared by many strangers, so platforms usually treat them as high risk.
What do ‘abuse reports’ and ‘network abuse rate’ mean?
Abuse reports mean security feeds have recently seen this IP take part in attacks, scanning or spam; we show how many feeds list it. The network abuse rate looks at the whole block: the share of its addresses seen in abuse, graded very low, low, elevated, high or very high. Even a clean IP can be penalised by platforms if its neighbourhood has a bad reputation, so both matter.
Why check time zone consistency?
Browsers expose the device’s time zone. If your IP says you are in the United States but your device is set to an Asian time zone, platforms may conclude you are using a proxy or a remote setup. The check runs entirely in your browser; nothing is uploaded or stored.
Why is IP location sometimes inaccurate?
IP geolocation is built from registry records, location feeds that operators publish themselves (RFC 8805 defines the geofeed format) and network measurements; it is not GPS. Country level is usually accurate, while city level can be off by tens or even hundreds of kilometres, more so on mobile and corporate networks. Treat the location on this page as approximate.
How is the IP quality score calculated?
The score starts at 100 and deducts: Tor exit −60; public proxy −45; VPN −30; abuse reports −20, up to −35 when several feeds list the IP; network abuse rate very high −25, high −15, elevated −8; datacenter IP −20; anonymizing relays such as iCloud Private Relay −10; not native −5. 85 and above is excellent, 70–84 good, 50–69 fair and below 50 high risk. Risk data comes from ipapi.is, and the same rules apply to every IP, including our own.
What is the difference between static, dynamic and shared IPs?
A dynamic IP is assigned automatically by the provider via DHCP (RFC 2131) and can change at any time; a static IP stays the same for the long term. Many mobile networks and some broadband providers put many customers behind one public IP using carrier-grade NAT (RFC 6598 reserves 100.64.0.0/10 for this). For accounts that need stable logins over time, one dedicated fixed IP per device is the least likely to trigger unusual-login checks.
References
- RFC 791 — Internet Protocol (IPv4)
- RFC 8200 — IPv6 Specification
- RFC 1930 — Autonomous Systems (AS)
- RFC 2131 — DHCP
- RFC 6598 — Shared Address Space (CGN)
- RFC 8805 — Self-Published IP Geolocation Feeds
- MaxMind — country vs registered_country
- Google — IPv6 adoption statistics
- Internet Society Pulse — IPv6 reaches majority
- Tor Project — exit node list
- ipapi.is — API fields